Energizing your Enphase System

Step 1

Open your home’s main service panel (breaker box), and turn the solar breakers to the “ON” position. These breakers should be labeled either near the breakers or on your breaker list.

Step 2

Flip the AC disconnect/rapid shutdown switch to the “ON” position.


Style, labeling, and type may vary.

Step 3

Open your Enphase IQ Combiner box and flip all the breakers to the “ON” position. After flipping these breakers, wait 3–4 minutes to allow the system to fully turn on.


The number and placement of these breakers will vary. These breakers can be flipped in any order.

Step 4

After waiting 3–4 minutes, press the left then right button (in this order). This will start the AP mode and begin a device scan on the Enphase IQ Gateway.


Once you’re done, that’s it! You should see production on the Enphase App within 2–3 hours of consistent sunlight.

What do the LEDs on the Envoy indicate?

Still need help?

Reach out to our support team for assistance.

Contact Us

Enphase App

After energizing your system, you can track and monitor your system using the Enphase App. Blue Raven Solar will email you the access to your system, and you can download the app to your smartphone or log in to Enphase online below. If you haven’t received an email granting you access to the Enphase App, please reach out to our support department.

Enphase, the “e” logo, IQ, and other marks are trademarks of Enphase Energy, Inc. in the US and other countries. Apple and the Apple Logo are registered trademarks of Apple Inc. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. Other product and company names mentioned herein may be trademarks of their respective companies.

System Offline?

You can use the following methods to connect your system to the internet, and begin monitoring your production. Please contact Enphase support for assistance.

Request a Text Message

"*" indicates required fields